High Throughput Wireless Data Transceiver Installation Guide
LIG000^AA Rev A
5 of 7
Gain Manufacturer
Manufacturer
Model Number
FreeWave
Model Number
6dB Antenex
FG9026
EAN0906NF
5dB Antenex
Maxrad
EB8965C
BMEFC8985HD
EAN0905WC
3dB Maxrad
MAX-9053
EAN0900WC
0dB JEMA
JA900SS
EAN0900WR
0dB Mobile
Mark
PSTG0-915FW
EAN0900RQ
0dB Mobile
Mark
PSTN3-915S
EAN0900SH
0dB Mobile
Mark
PSTG0-915SE
EAN0900SQ
0dB Mobile
Mark
PSTN3-915N
EAN0900NH
WARNING: Any antennas placed outdoors must be properly grounded. Use extreme
caution when installing antennas and follow all instructions included with the
antennas.
Table 1 below provides the maximum output power settings for HT2+ FreeWave transceivers
at given antenna gain (10 dB and 6 dB Yagi antennas are given as an example) and cable
loss combinations.
NOTE: It is the installer’s responsibility to ensure that the emission limits are not
exceeded
.
Table 2 below shows how the RFXmitPower settings on the radio correspond to the EIRP of
the transceiver-cable-antenna combination for the 10 dB Yagi antenna at different cable loss
values.
Shaded area indicates combinations where EIRP limitations exceed FCC regulations
and RF Xmit Power must be reduced.
Table 3 below is similar to the Table 2, but shows the information for the 6 dB Yagi antenna.
Table 1:
Output Power Settings at given Antenna Gain &
Cable Loss combination.
Cable Loss
1dB 2dB 3dB 4dB
Antenna
10dB
7 8 9 10
Gain
6dB
10 10 10 10
Table 2:
EIRP for 10dB Yagi Antenna, Cable loss vs. RF
Xmit Power Setting.
Cable Loss
1dB 2dB 3dB 4dB
RF Xmit
10
39.00
38.00
37.00
36.00
Power
9
37.80
36.80
35.80 34.80
8
36.58
35.58 34.58 33.58
7
34.91 33.91 32.91 31.91
6
32.63 31.63 30.63 29.63
