P6F104 User’s Manual
34
3.3 STANDARD CMOS Features
Selecting “STANDARD CMOS Features “on the main program
screen displays this menu:
Standard CMOS Features Screen
The Standard CMOS Setup utility is used to configure the following
features:
Date:
Set Month, Day, Year.
Time:
Set Hour, Minute, and Second. Use 24 Hour clock format (for
PM numbers, add 12 to the hour, you would enter 4:30 p.m. As
16:30).
Daylight Saving:
Disabled or Enabled the daylight saving function.
Hard Disks:
There are four hard disks listed: “IDE Primary Master”,
“IDE Primary Slave”, “IDE Secondary Master” and “IDE Secondary
Slave”. For each IDE channel, the first device is the “Master” and the
second device is “Slave”. Hard disk Types from 1 to 45 are standard
ones; Press <Enter> key for IDE Auto detection otherwise, Type
“Press Enter or None” is IDE HDD auto detection; Type “User” is
user definable, and Type “None” is not installed.
Chapter 3: BIOS Configuration
CMOS Setup Utility - Copyright (C) 1994-1999 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Fri, May 21 1999
Time (hh:mm:ss)
10 : 43 : 48
Total Memory
Extended Memory
Base Memory
Halt On
Video
Drive B
Drive A
IDE Secondary Slave
IDE Secondary Master
IDE Primary Slave
IDE Primary Master
Daylight Saving
31744K
30720K
640K
All, But Keyboard
EGA/VGA
None
1.44M, 3.5 in.
Press Enter None
Press Enter None
Press Enter None
Press Enter None
Disabled
Menu Level
year and century
Change the day, month,
Item Help
