6
NOTE:
It is recommended that you apply grease to the threads of each bolt as you assemble your tread-
mill, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts
are in place and partially threaded in before completely tightening any ONE bolt.
Assembly Step 1
1.
Lift left console mast into upright position.
Be sure to hold the console mast firmly, as it
will not stay in the upright position on it’s own.
2.
Move left side linkage arm, Teflon Washer (B)
and Teflon Washer (C) into position and insert
bolt (A) and tighten.
3.
Repeat on the right side.
4.
Cut and remove the banding strap.
1.
Lift the running deck until lock latch is fully
engaged.
2.
Remove console assembly from treadmill car-
ton and place out of the way.
3.
Lower the treadmill running deck from the
folded position.
Assembly Step 2
B
C
Summary of Contents for 123 30410-0
Page 1: ...123 30410 0 Treadmill User s Guide ...
Page 28: ...27 Weekly Log Sheets ...
Page 29: ...28 Weekly Log Sheets ...
Page 30: ...29 Monthly Log Sheets ...
