Freescale Semiconductor USB-KW40Z, User Manual

Page: 9 / 26

Freescale USB Development Board USB-KW40Z User’s Guide, Rev. 0, 10/2015
Freescale Semiconductor, Inc 9
USB-KW40Z development board
1]
Trap will add 1 to 2 dB of loss.
4.2 Functional description
The USB-KW40Z is built around the Freescale MKW40Z160 SoC in a 48-pin LGA package. The
USB-KW40Z features a IEEE Std. 802.15.4 and BLE 2.4 GHz radio frequency transceiver and a Kinetis
family ultra low-power, mixed-signal ARM Cortex-M0+ microcontroller in a single package. This board
is intended as a simple evaluation platform and as a building block for application development. The
four-layer board provides the MKW40Z160 with its required RF circuitry and a 32 MHz reference
oscillator crystal. The layout for this base level functionality can be used as a reference layout for your
target board.
Figure 5 shows a simple block diagram.
Sensitivity for 1% packet error rate
(PER) (+25 °C) BLE — -94 — dB Refer to datasheet
RF Transmitter
RF Power Output -20 — +5 dBm Programmable in steps.
At the MMCX connector with no trap.
1
2nd harmonic — ≤ 50 ≤ 40 dBm —
3rd harmonic — ≤ 50 ≤ 40 dBm —
Regulatory Approval
FCC — — — — Product is approved according to the FCC
part 15 standard
CE (ETSI) — — — — Product is approved according to the EN
300 328 V1.7.1 (2006-10) standard
CE (EMC) — — — — Product is approved according to the EN
301 489-1 V1.6.1 (2005-09) and EN 301
489-17 V1.2.1 (2002-08) standards
Safety
UL — — — — Product is approved according to the IEC
60950-1 and EN 60950-1, First Edition
standards
Environment
RoHS — — — — Product complies with the EU Directive
2002/95/EC of 27 January 2003
WEEE — — — — Product complies with the EU Directive
2002/95/EC of 27 January 2003
Table 1. USB-KW40Z specifications (continued)
Parameter Min Typ Max Units Notes/Conditions