Quick Start Guide
6
Step-by-Step Installation Instructions
Set up Serial
Communication
• A USB-to-serial bridge is supported
through the USB CDC functionality.
The serial port number is viewable
in the Device Manager (right click,
My Computer>Properties>Device
Manager>Port Settings). This allows
for serial communication between the
Tower module and a terminal program
running on the PC via the USB
connection.
• Setup a terminal program to use this
COM port with the following settings:
115200 baud, eight data bits, no
parity, one stop bit. Alternatively, you
may use the TWR-SER or TWR-SER2
serial module for serial communication.
See the TWR-VF65GS10 lab guide for
more details.
Locate and Install CDC
Device Drivers
• The module will enumerate as a
composite “Mass Storage and Serial
CDC Device.” The drivers for the
CDC functionality can be found
on the enumerated drive (for example:
F:\TWR-VF65GS).
• Go to that drive to find the CDC drivers
and install them.
4
3
