TOWER SYSTEM
5
Step-by-Step Installation Instructions
This quick start guide details how to set up the TWR-VF65GS10 module and run
some demo projects on the device.
2
Configure the
Hardware
• Assemble your Tower System per the
instructions found in the TWR-ELEV
module package, unless the board will
be used stand-alone.
• Insert the dual-headed USB-A side of
the provided USB cable into the PC
and insert the micro-B end into the
OpenSDA USB port (J3) on the
TWR-VF65GS10 module. Allow the
PC to automatically configure the
USB drivers if needed.
1
Download Software
and Tools
Download installation software
and documentation under
“Jump Start Your Design”
at
freescale.com/TWR-VF65GS10
.
