Freescale Semiconductor TWR-MPC5125, User Manual, Page: 16 / 31

15
TWR-MPC 5125
TWR-MPC5125 User Manual
Made by
www. .com
semiconductor
6.2 Target Setup
1). Connect your board to the network via the Ethernet port.
2). Connect your board to your host machine via a serial port.
3). Connect the board power supply.
4). Start minicom or other serial communications program of your choice.
Serial settings are 115200 baud, 8 bit chars, even parity.
5). Power on board and see the u-boot bootup message.
U-Boot 2009.03-00012-g21a175a-dirty (Jan 21 2010 - 11:03:07) MPC5125
CPU: MPC5125 rev. 1.0, Core e300c4 at 400 MHz, CSB at 200 MHz
board: mpc5125_mpu
I2C: ready
DRAM: 256 MB
NAND: 2048 MiB
In: serial
Out: serial
Err: serial
Net: FEC ETHERNET
Type run nfsboot to mount root filesystem over NFS
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args =/tftpboot
}
9). Restart the nfs and tftp servers on your host computer
$ sudo /etc/init.d/xinetd restart
$ sudo /etc/init.d/nfsserver restart