Freescale Semiconductor MPC5777C EVB, User Manual, Page: 28 / 61

Configuration
—Daughter Cards
MPC5777C EVB User Guide, Rev. 0
28 Freescale
Jumper Description
Jumper Setting
– MII-Lite
Mode
Jumper Setting
– RMII
Mode
J510 FEC Clock Selection
1-2: Connect with Mother
Board 2-3: Connect with On Board
50MHz Oscillator
J524
On Board FEC 50MHz
CLK Enable
1-2: Clock Oscillator in Tri-
state 2-3: Clock Oscillator in
Normal Operation
4.8 MCU Interfaces with Mother Board
The Signals interfaces from the MCU are connected with High Density connecter which connects
with Mother Board for user access. Following interfaces can be access in the Mother Board
through 0.1inch pitch 18-pin Headers,
•
ADC channels
•
Enhanced Modular IO Subsystem (eMIOS)
•
Enhanced Time Processing Unit (eTPU)
•
Deserial Serial Peripheral Interface (DSPI)
4.9 Test points — 416 Daughter Card
MPC5777C-416DS Daughter card test points are listed and detailed in Table 16.
Table 16: Test points – 416 daughter card
Signal TP name Shape Description
MB PL11 TP3 Pad Motherboard connection PL11
MB PL13 TP4 Pad Motherboard connection PL13
MB PL15 TP5 Pad Motherboard connection PL15
MB PJ5 TP6 Pad Motherboard connection PJ5
MB PL9 TP7 Pad Motherboard connection PL9
MB PJ7 TP8 Pad Motherboard connection PJ7
MB PD7 TP9 Pad Motherboard connection PD7
MB PF13 TP10 Pad Motherboard connection PF13
MB PD6 TP11 Pad Motherboard connection PD6
5.0V_LR TP12 Hook 5V linear regulator output
RST_OUT_B TP13 Pad Reset out from U1
J22 26 TP14 Pad NEXUS connection J22 26
J22 28 TP15 Pad NEXUS connection J22 28
J22 32 TP16 Pad NEXUS connection J22 32
J22 34 TP17 Pad NEXUS connection J22 34
J22 38 TP18 Pad NEXUS connection J22 38
J22 40 TP19 Pad NEXUS connection J22 40