Loading and Initialization
Using MMDS Software
MMDS0508OM/D
MOTOROLA
Loading and Initialization
39
Running MMDS08
To call the debugger executable directly from the DOS prompt, type this
command
:
C:\MMDS08>MMDS08
Note these five options for the startup command:
1. If the MMDS08 is connected to COM2, COM3, or COM4, add the
corresponding integer to the command:
C:\MMDS08>MMDS08 2
2. If the computer has a monochrome monitor, add BW to the
command:
C:\MMDS08>MMDS08 BW
3. To specify a personality file to be loaded automatically (instead of
the default), add the –M option, followed by the filename. (Do not
put a space between the M and the filename.) If the specified
personality file has a .MEM extension, the .MEM extension may
be omitted from the filename:
C:\MMDS08>MMDS08 –M<filename>
4. To specify an S-record file (and any map file with the same name)
to be loaded automatically, add the filename option. If the
specified S-record file has a .S19 extension, the .S19 extension
may be omitted from the filename:
C:\MMDS08>MMDS08 <filename>
5. To specify a default baud rate of 9600, add the –B option:
C:\MMDS08>MMDS08 –B
NOTE:
Multiple options in the start-up command should be separated by a
space.
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..
