Freescale Semiconductor MCF5206eLITE, User Manual

Page: 30 / 61

29
2.4.18. RM - Register Modify
RM RM RM RM RM
Usage: RM reg data
The RM command modifies the contents of the register reg to data. The value for reg is the name of the register,
and the value for data may be a symbol name, or it is converted according to the user defined radix, normally
hexadecimal.
dBUG preserves the registers by storing a copy of the register set in a buffer. The RM command updates the copy
of the register in the buffer. The actual value will not be written to the register until target code is executed.
Examples:
To change register D0 to contain the value 0x1234, the command is:
rm D0 1234
2.4.19. RESET - Reset the board and dBUG
RESET RESET
RESET RESET
RESET
Usage: RESET
The RESET command attempts to reset the board and dBUG to their initial power-on states.
The RESET command executes the same sequence of code that occurs at power-on. This code attempts to initialize
the devices on the board and dBUG data structures. If the RESET command fails to reset the board to your
satisfaction, cycle the power or press the reset button.
Examples:
To reset the board and clear the dBUG data structures, the command is:
reset
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..