Freescale Semiconductor KIT33882EKEVB, User Manual

Page: 9 / 24

KT33882UG, Rev. 1.0
Freescale Semiconductor 9
Getting to Know the Hardware
3.9 Output Signal Definitions
The MC33882 IC has eight output signals that are used to control various devices and outputs on the evaluation board. These signals are:
3.10 USB/SPI Dongle Connector
This is a 20-pin, 0.1" center, dual-row connector designed to interface directly to the FSD unit. The FRDM-KL25Z SPI dongle connector
consists of the following 20 pins (J2 on FRDM-KL25Z).
IN0&IN1 IN0&IN1 Dual output control for IN0 and IN1
IN0 IN0 Parallel input control for IN0
IN1 IN1 Parallel input control for IN1
IN2 IN2 Parallel input control for IN2
IN3 IN3 Parallel input control for IN3
IN4 IN4 Parallel input control for IN4
IN5 IN5 Parallel input control for IN5
IN6 IN6 Parallel input control for IN6
IN7 IN7 Parallel input control for IN7
Table 5. Output Signal Definitions
Schematic Label Name Description
OUT0 OUT0 Controls OUT0
OUT1 OUT1 Controls OUT1
OUT2 OUT2 Controls OUT2
OUT3 OUT3 Controls OUT3
OUT4 OUT4 Controls OUT4
OUT5 OUT5 Controls OUT5
OUT6 OUT6 Controls OUT6
OUT7 OUT7 Controls OUT7
Table 6: USB/SPI Dongle Pin Description
Pin Number FSD Name EVB Name Description
1 DATA0 DATA0 Connected to IN0 or IN4&IN5 via a jumper
2 SPI1-CSB <NC> <unused>
3 DATA1 DATA1 Connected to IN1
4 SPI1-CLK <NC> <unused>
5 DATA2 DATA2 Connected to IN2 or IN2&IN3 via a jumper
6 SPI0-CSB SPI0_CSB SPI signal - Chip Select Bar
7 DATA3 DATA3 Connected to IN3
8 SPI0-MOSI SPI0_MOSI SPI signal - Serial In
9 DATA4 DATA4 Connected to MODE_B
10 SPI0-MISO SPI0_MISO SPI signal, Serial Out
11 CTRL0 CNTL0 Connected to IN4 or IN0&IN1 via a jumper
12 SPI0-CLK SPI0_CLK SPI signal - Serial Clock
13 CTRL1 CNTL1 Connected to IN5
Table 4. Input Signal Definitions (continued)
Schematic Label Name Description