KT33816UG User’s Guide Rev. 3.0 1/2014
Freescale Semiconductor
5
Evaluation Board Configuration
8
Evaluation Board Configuration
Figure 2. Evaluation Board Setup
9
Installing SPIGen Freeware on your Computer
The latest version of SPIGen is designed to run on any Windows 8, Windows 7, Vista or XP-based operating
system. To install the software, go to
www.freescale.com/analogtools
and select your kit. Click on that link
to open the corresponding Tool Summary Page. Look for “Jump Start Your Design”. Download to your
computer desktop the SPIGen software as well as the associated configuration file.
Run the install program from the desktop. The Installation Wizard will guide you through the rest of the
process.
To use SPIGen, go to the Windows Start menu, then Programs, then SPIGen, and click on the SPIGen icon.
The SPIGen Graphic User Interface (GUI) will appear. Go to the file menu in the upper left hand corner of
the GUI, and select “Open”. In the file selection window that appears, set the “Files of type: ” drop-down
menu to “SPIGen Files (*.spi)”. (As an exceptional case, the file name may have a .txt extension, in which
USB/SPI Dongle
(KITUSBSPIDGLEVME)
16-Pin SPI
Ribbon Cable
Power Supply
GND
V
SUPP
Smart Pre-driver
(KIT33816AEEVM)
To J3
IO port
