Freescale Semiconductor i.MX 6SoloLite Linux Reference Manual Download Page 51 | Manualshive

Page: 51 / 199

background image

5.5 Menu Configuration Options

To get to the Linux kernel configuration options available for the EPDC module, use the
command ./ltib -c when located in the <ltib dir>. On the screen displayed, select

Configure the kernel and exit. When the next screen appears select the options to
configure. The following Linux kernel configuration options are provided for the EPDC
module:

• CONFIG_MXC_EINK_PANEL includes support for the Electrophoretic Display

Controller. In menuconfig, this option is available under:

• Device Drivers > Graphics Support > E-Ink Panel Framebuffer

• CONFIG_MXC_EINK_AUTO_UPDATE_MODE enables support for auto-update

mode, which provides automated EPD updates through the deferred I/O framebuffer
driver. This option is dependent on the MXC_EINK_PANEL option. In menuconfig,
this option is available under:

• Device Drivers > Graphics Support > E-Ink Auto-update Mode Support

NOTE

This option only enables the use of auto-update mode.
Turning on auto-update mode requires an additional
IOCTL call using the
MXCFB_SET_AUTO_UPDATE_MODE IOCTL.

• CONFIG_FB to include frame buffer support in the Linux kernel. In menuconfig,

this option is available under:

• Device Drivers > Graphics support > Support for frame buffer devices
• By default, this option is Y for all architectures.

• CONFIG_FB_MXC is a configuration option for the MXC Frame buffer driver. This

option is dependent on the CONFIG_FB option. In menuconfig, this option is
available under:

• Device Drivers > Graphics support > MXC Framebuffer support
• By default, this option is Y for all architectures.

• CONFIG_MXC_PXP enables support for the PxP. The PxP is required by the EPDC

driver for processing (color space conversion, rotation, auto-waveform selection)
framebuffer update regions. This option must be selected for the EPDC framebuffer
driver to operate correctly. In menuconfig, this option is available under:

• Device Drivers > DMA Engine support > MXC PxP support

5.6 Programming Interface

Chapter 5 Electrophoretic Display Controller (EPDC) Frame Buffer Driver

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

51

«
...
49
50
51
52
53
...
»

Summary of Contents for i.MX 6SoloLite Linux








































































































































































































Reviews:

No comments

Related manuals for i.MX 6SoloLite Linux

Brand: 3Com Pages: 2

Brand: 3Com Pages: 74

Brand: 3Com Pages: 6

Brand: ICP DAS USA Pages: 14

Brand: ICP DAS USA Pages: 25

Brand: ICP DAS USA Pages: 15

Brand: ICP DAS USA Pages: 8

Brand: SMART Pages: 15

Brand: Buffalo Pages: 2

DL-DVI-Vision-IP Series

Brand: G&D Pages: 228

CY62136EV30 MoBL

Brand: Cypress Semiconductor Pages: 12

Brand: Doremi Pages: 15

Brand: Laser Pages: 4

Brand: Alcatel-Lucent Pages: 12

Brand: Renesas Pages: 4

Brand: Dinstar Pages: 103

Brand: ZyXEL Communications Pages: 263

Brand: IBM Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands