background image

Description 

URL 

HEG-specific documentation, BSP and demo 
software 

adeneo-embedded.com/HEG 

Freescale HEG home page

freescale.com/HEG 

Freescale LTIB Linux distribution 

freescale.com/webapp/sps/site/prod_

summary.jsp?code=i.MX283&nodeId=018rH3Zr

DRA24A&fpsp=1&tab=Design_Tools_Tab# 

Freescale i.MX28 home page (data sheet, user 
guide, user manual) 

freescale.com/imx28 

Freescale ZigBee Beekit home page

freescale.com/webapp/sps/site/prod_

summary.jsp?code=BEEKIT_WIRELESS_

CONNECTIVITY_TOOLKIT 

Freescale required HW ZigBee kit for demo (P/N 
1322xNSK-DBG or 1322xDSK-DBG) 

freescale.com/webapp/sps/site/prod_

summary.jsp?code=1322x_Dev_Kits 

Prosyst mBS home page 

prosyst.com 

QNX smart energy home page 

qnx.com/download/feature.

html?programid=20811 

Windows Embedded Compact 7 home page 

microsoft.com/windowsembedded/en-us/

products/windowsce/default.mspx 

Useful Links

Freescale and the Freescale logo are trademarks of Freescale 

Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. ARM926EJ is a 

trademark of ARM Limited. All other product or service names 

are the property of their respective owners. © 2011 Freescale 

Semiconductor, Inc. 
Doc Number: HMENRGYGTWYQSG / REV 1

For more information, 

visit 

freescale.com/heg

.

Summary of Contents for Home Energy Gateway













Reviews: