Getting Started Out of the Box
You can utilize the FRDM-FXS-MULTI-B with any
Arduino MCU board. We recommend using either the
Kinetis KL25Z or KL20 MCU boards.
In order to power up the board and utilize the BlueTooth
module you must install the 3.3 V Power Jumper and
the BT Power Jumper. Once these jumpers are installed
you must slide the power switch to ON to power the
board via the battery. The location of these jumpers are
indicated with red circles in the image to the right. The
jumpers are included in the box inside the accessories
bag. The battery is charged when a powered USB cable
TM
External Use
5
bag. The battery is charged when a powered USB cable
is connected to either USB slot on the Freescale
Freedom MCU board.
The Bluetooth friendly name is BlueRadiosXXXXXX
and requires no PIN. The Bluetooth module
documentation can be found at:
http://www.blueradios.com/hardware_LE4.0-D2.htm
For more information on OpenSDA, refer to the
OpenSDA User’s Guide
or
www.pemicro.com/opensda
.
