6
Quick Start Guide
Verify U-Boot
Prompt
With the board powered and
connected to the computer,
and with HyperTerminal/
serial software running, we
should see the u-boot screen,
as shown in the picture. If
the u-boot screen does not
appear, press the power
button on the front of the
enclosure to initiate.
Press any key before the
autoboot countdown reaches
0 in order to have access to
the u-boot command prompt.
Next
Steps
At this point the BSC9131RDB has been
verified as functional. The next section
of this guide will discuss the available
documentation for the BSC9131RDB user.
To continue on with u-boot, the SDK
documentation introduced below will guide
the reader on to the next logical steps in
u-boot and Linux
®
configuration.
6
7
