Quick Start Guide
10
Other Supporting Documentation
(continued)
SmartDSP OS
Once the user has the basic flow of the
SDK, IPC and debugging with CodeWarrior,
the user may take advantage of the
SmartDSP OS package, on which the
SC3850 core operates. SmartDSP OS
comes standard with the CodeWarrior
for StarCore DSP tools suite, in the
<CodeWarrior Install Folder>\SC\StarCore_
Support\SmartDSP folder.
SmartDSP includes a number of demos on
how to program SmartDSP to utilize various
BSC9131 features. These demos are
located in the following SmartDSP folder:
SmartDSP\demos\starcore\BSC9x3x\.
Each demo folder comes with a readme file
explaining how to run the demo.
Two highlighted SmartDSP demos for the
BSC9131 are the aic_loopback demo and
the IPC demo. The user can run the IPC
demo discussed in the SDK section of this
document using the SmartDSP instructions
instead of running via the Linux dsp_bt
command command.
To demonstrate the AIC loopback
demo, the user needs an RF card (the
demo was created and tested using a
Benetel RF card, sold separately from
the RDB). Instructions for running the
AIC loopback demo are included in the
SDK documentation and the SmartDSP
demo documentation. The user should
read both sets of documentation for AIC
programming, as Linux is used to initialize
the AIC, while SmartDSP is used for
runtime access of the AIC.
