manualshive.com logo in svg

Freescale Semiconductor 802.15.4/Zigbee, Reference Manual, Page: 63 / 66

Share
Download
Freescale Semiconductor 802.15.4/Zigbee Reference Manual Download Page 63

 

Freescale Semiconductor                    Embedded Bootloader Reference Manual, Rev. 0.0 

A-1 

Appendix A   
Release Folder and File Structure 

This appendix describes the folder and file structure for this release. 

A.1. Folder Structure 

 

      802.15.4_Headers

 

           Ghdr                                                          

Global headers from the 802.15.4 MAC/PHY Release 

     Bin

 

      Embedded_Bootloader                                 

When target is built, the output files are stored here. 

              AX-0308RevC                                        

Freescale’s reference build of the Embedded Bootloader 

                                                                               for the Axiom AXM-0308 
          

                                                                     

development board 

              DIG-528-2_DIG-536-2_RD01               

DIG-528-2 and DIG-536-2 are Freescale’s reference 

                                                                               build for the DIG-528-2 and DIG-536-2 EVB’s. 
                                                                               RD01 is Freescale's reference build for all PCB's using 
                                                                               the Freescale Reference Design version 01.  

      Embedded_Bootloader_Functionality_Lib  

Embedded Bootloader functionality library  

                                                                                    (source code not released) 

       HCS08_Flash_Lib                                          

Embedded Bootloader HCS08 flash library  

                                                                                 (source code not released) 

    prm                                                                     

Linker file 

    sources                                                                

Source code 

Summary of Contents for 802.15.4/Zigbee



































































Reviews:

No comments