manualshive.com logo in svg

Freescale Semiconductor 802.15.4/Zigbee, Reference Manual, Page: 18 / 66

Share
Download
Freescale Semiconductor 802.15.4/Zigbee Reference Manual Download Page 18

 

3-2                    Embedded Bootloader Reference Manual, Rev 0.0              Freescale Semiconductor 

3.1  Graphical User Interface (GUI) Version 

To use the GUI version of the Test Tool, execute the following file: 

[installation directory]\Freescale\Test Tool\Test Tool.exe 

3.1.1 Using the Tools Menu Option 

After clicking on the Tools menu option, click the Communication Settings option to choose the baud rate 
specified for the current embedded application. 

Notice that applications require that you push one or more buttons or some other functions to enable 
upload of new firmware. See the 

Zigbee/802.15.4 Evaluation Kit Quick Start Guide

, AN2772/D, for a 

description of what to do for a specific application. 

If no application is downloaded, use the default settings specified for the Embedded Bootloader. See 

Chapter 2

 for more information.  

Use the Add… buttons. Click “Close”. 

 

 

 

Figure 3 Tools Menu Selection 

Add Buttons 

Close Button 

Baud Selection 
Buttons 

Tools Menu 

Summary of Contents for 802.15.4/Zigbee



































































Reviews:

No comments