REPLACING THE WALKING PLATFORM AND THE WALKING BELT
Inspect the walking platform periodically for wear. If there is any wood showing through the phenolic coating, or if
the surface is damaged, the walking platform should be replaced. When the walking belt becomes worn, it should
be replaced. The walking platform and the walking belt should be replaced after every 10,000 to 15,000 miles
(16,000 to 24,000 kilometers). Follow the instructions below to replace the walking platform and/or the walking
belt.
Make sure to keep track of which holes the screws go in.
1.
Remove the key and unplug the power cord.
Remove the
four 5/16" x 1/2" Bolts (16) and the Motor Hood (66).
2. Remove the two #8 x 3/4" Screws (25) (only one side is
shown). Then, remove the Right Rear Cap Insert (61) and the
Left Rear Cap Insert (not shown).
3. Remove the two indicated #8 x 3/4" Screws (25) from each
side of the treadmill (only one side shown).
4. Remove the two indicated #8 x 3/4" Screws (25). Then,
remove the Rear Cap (59).
33
1
16
16
66
16
25
61
2
3
25
25
25
59
4
