23
THE INFORMATION MODE
The console features an information mode that allows
you to view treadmill usage information, select a sys-
tem of measurement for the console, and turn on and
turn off the demo mode. The information mode also al-
lows you to adjust the settings of the television and to
save channels into the television’s memory.
Follow the steps below to use the information mode.
1. Press the Stop button while inserting the key
into the console.
When the information mode is selected, the lower
part of the screen will show the total number of
miles or kilometers that the walking belt has moved
(Distance) and the total number of hours that the
treadmill has been used (Time).
In addition, the center of the display will show the
word “English” for English miles or the word “Metric”
for metric kilometers. Press the Speed increase
button to change the unit of measurement if de-
sired.
Note: The console features a display demo mode,
designed to be used if the treadmill is displayed in
a store. While the demo mode is turned on, the
console will function normally when you plug in the
power cord, switch the reset/off circuit breaker to
the reset position, and insert the key into the con-
sole. However, when you remove the key, the dis-
plays will remain lit, although the buttons will not
function. If the demo mode is turned on, the words
“DEMO ON” will appear on the screen while the in-
formation mode is selected. To turn on or turn off
the demo mode, press the Speed decrease button
until the words “DEMO OFF” appear on the screen.
While the information mode is selected, you can
select an equalizer setting to optimize the sound of
your personal music, if desired. To select an equal-
izer setting, first press the Stop button. Next, press
the Speed increase and decrease buttons to
choose among Default, Classic, Country, Techno,
or Rock. When you have selected a setting, re-
move the key from the console. Then, press the
Stop button while reinserting the key into the con-
sole.
2. Press the TV Power button and adjust the
brightness, contrast, color, sharpness, and/or
hue of the television.
When you press the TV Power button, the brightness
level indicator will appear on the television screen.
Press the Volume (VOL.) buttons to adjust the
brightness setting if desired.
Next, press the Channel (CHAN.) buttons until the
contrast, color, sharpness, or hue level indicator ap-
pears. Adjust the settings, if desired, by pressing the
Volume buttons.
3. Press the TV Power button again and add or
delete channels.
After all valid channels available in your area have
been saved into the television’s memory (see step
5 on this page), you can manually add channels or
delete unwanted channels.
To add or delete a channel, first press the Channel
buttons until the desired channel number appears
on the screen. Then, press the Volume increase
button to add the channel, or the Volume decrease
button to delete the channel. Continue this process
until you have added all desired channels and
deleted all unwanted channels.
4. Press the TV Power button again and select an
antenna connection or a cable connection.
After you press the TV Power button, press the
Volume decrease button to select the Antenna set-
ting, the Volume increase button to select the
Standard Cable setting, the Channel decrease but-
ton to select the Cable IRC setting, or the Channel
increase button to select the Cable HRC setting. If
you have connected an antenna to the treadmill,
the Antenna setting should be selected. If you have
connected a CATV cable, one of the three Cable
settings should be selected; try all three Cable set-
tings, if necessary, to find the optimal setting.
5. Press the TV Power button again and save
channels into the television’s memory.
When you press the TV Power button, the televi-
sion will begin scanning all of the channels avail-
able in your area. When no broadcast signal is de-
tected on a channel, the channel will be skipped.
When a broadcast signal is detected, the channel
will be saved into memory and the next channel
will be selected. This process will continue until the
highest channel is reached.
Do not remove the
key while the television is scanning channels.
6. When you are finished using the information
mode, remove the key from the console.
To exit the information mode at any time (except
while the television is scanning channels), remove
the key from the console.
