manualshive.com logo in svg

Freemotion FMTL39813.2, User Manual

Share
Download
Freemotion FMTL39813.2 User Manual Download Page 16

16

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to 

cold temperatures, allow it to warm to room tem-

perature before turning on the power. If you do not 

do this, you may damage the console displays or 

other electrical components.

Plug in the power cord 

(see page 14). Next, 

locate the power switch 

on the treadmill frame 

near the power cord. 

Press the power switch 

into the on position. 

IMPORTANT: The console features a display demo 

mode, designed to be used if the treadmill is dis-

played in a store. If the displays light as soon as 

you plug in the power cord and press the power 

switch into the reset position, the demo mode is 

turned on. To turn off the demo mode, hold down 

the Stop button for a few seconds. If the displays 

remain lit, see THE MAINTENANCE MODE on page 

18 to turn off the demo mode. 

Next, stand on the foot rails 

of the treadmill. Find the clip 

attached to the key and slide 

the clip onto the waistband of 

your clothes. Then, insert the 

key into the console. After 

a moment, the displays will 

light. 

IMPORTANT: In an 

emergency, the key can be pulled from the console, 

causing the walking belt to slow to a stop. Test the 

clip by carefully taking a few steps backward; if the 

key is not pulled from the console, adjust the posi

-

tion of the clip.

HOW TO USE THE MANUAL MODE

1.    Insert the key into the console. 

   See HOW TO TURN ON THE POWER at the left.

2.   Enter your age and weight if desired.

   To enter your age, press the Age increase and 

decrease buttons. To enter your weight, press the 

Wt. increase and decrease buttons.

3.  Start the walking belt. 

    To start the walking belt, press the Start button, the 

Speed increase button, or one of the numbered 

Speed buttons. 

   If you press the Start button or the Speed increase 

button, the walking belt will begin to move at 1 mph. 

As you exercise, change the speed of the walking 

belt as desired by pressing the Speed increase 

and decrease buttons. Each time you press one of 

the buttons, the speed setting will change by 0.1 

mph; if you hold down the button, the speed setting 

will change in increments of 0.5 mph. Note: After 

you press the button, it may take a moment for the 

walking belt to reach the selected speed setting.

   If you press one of the numbered Speed buttons, 

the walking belt will gradually change speed until 

it reaches the selected speed setting. To select a 

speed setting that includes a decimal—such as 3.5 

mph—press two numbered buttons in succession. 

For example, to select a speed setting of 3.5 mph, 

press the 3 button and then immediately press the 

5 button.

   To stop the walking belt, press the Stop button. The 

time will begin to flash in the display. To restart the 

walking belt, press the Start button or the Speed 

increase button.

4.  Change the incline of the treadmill as desired.

     To change the incline of the treadmill, press the 

Incline increase or decrease button or one of the 

numbered Incline buttons. Each time you press one 

of the buttons, the treadmill will gradually adjust to 

the selected incline setting. 

Key

Clip

On 

Summary of Contents for FMTL39813.2





































Reviews:

No comments

Brands by name

Popular brands

Load more brands