13
11. If necessary, move the treadmill to the desired
location (see HOW TO MOVE THE TREADMILL
on page 19).
After the treadmill is placed in the location where
it will be used, make sure that the Leveling Feet
(64) rest firmly on the floor. If the treadmill rocks
even slightly, turn the nut on the Leveling Foot
clockwise or counterclockwise until the rocking
motion is eliminated.
12. Cut the tie holding the Power Cord (70) to the
Power Cord Cover (112).
Plug the Power Cord (70) into the treadmill.
Attach the Power Cord Cover (112) with four #8
x 2" Screws (106).
64
11
12
13.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex key in a secure
place; the hex key is used to adjust the walking belt (see pages 25 and 26). Note: Extra hardware may be
included.
112
106
106
70
Summary of Contents for FMTL39813.2
Page 29: ...29 NOTES ...
