background image

3

1.

Read all instructions in this manual before
using the strength equipment. 

2.

Use the strength equipment only as
described in this manual. 

3.

It is the responsibility of the owner to ensure
that all users of the strength equipment are
adequately informed of all precautions, have
read and understood all warning and caution
labels, and are informed of how to use the
strength equipment properly. 

4.

Keep the strength equipment indoors, away
from moisture and dust. Do not put the
strength equipment in a garage or covered
patio, or near water. 

5.

Use the strength equipment only on a level
surface. Cover the floor beneath the strength
equipment to protect the floor.

6.

It is the purchaser’s responsibility to ensure
that there is enough space around the
strength equipment for the intended exer-
cise. Do not crowd the strength equipment.

7.

Using the anchor strap for maximum stabili-
ty, anchor the strength equipment to the floor
where required or whenever possible.

8.

Keep children under age 12 and pets away
from the strength equipment at all times. 

9.

The strength equipment is designed to sup-

port a maximum user weight of 350 lbs. (159
kg).

10. Always wear athletic shoes for foot protec-

tion while exercising.

11. Keep hands and feet away from moving

parts. Do not lean on or rest your hands on
the strength equipment when it is in use.

12. Check all cables, cable connections, and

pulleys before each use of the strength
equipment. Make sure that all parts are prop-
erly tightened. Replace any worn parts imme-
diately. 

13. All users of the strength equipment should

be instructed to report any injury or strength
equipment irregularity to facility staff imme-
diately.

14. Make sure that the weight pin is completely

inserted into one of the weight plates.

15. Make sure that the cable remains on the pul-

leys at all times. If the cable binds while you
are exercising, stop immediately and make
sure that the cable is on the pulleys and that
nothing is interfering with the cable or pul-
leys. Replace the cable at least every two
years.

16. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-
ing down.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. FreeMotion Fitness assumes no responsibility for personal injury
or property damage sustained by or through the use of this product. 

WARNING: 

To reduce the risk of serious injury, read the following important precautions

before using the strength equipment.

IMPORTANT PRECAUTIONS

Summary of Contents for BICEP GZFI8103.6

















Reviews: