7
2
2
5
4
14
14
1
Rack
2. Identify the Left Upright (1), which is marked with
an “L” sticker; do not confuse the Left Upright
with the Right Upright (2).
Attach the Left Upright (1) to the Left Frame (4)
with four M12 x 90mm Button Screws (14); do
not tighten the Button Screws yet.
Attach the Right Upright (2) to the Right
Frame (5) in the same way.
Make sure that the racks on the Left and
Right Uprights (1, 2) are aligned, and then
tighten the eight M12 x 90mm Button
Screws (14).
3
14
6
12
3. Attach a Short Storage Bar (6) to the Left Upright
(1) with an M12 x 90mm Button Screw (14).
Next, slide a Weight Bumper (12) onto the Short
Storage Bar (6).
Repeat this step on the other side of the
strength equipment.
1
