Freemotion 620 BE, User Manual

Page: 6 / 20

6
ASSEMBLY
1
37
37
39
3
1. Identify the Right Base (1) and the Right Front
Upright (3). Orient the parts as shown.
Attach the Right Front Upright (3) to the Right
Base (1) with two M10 x 75mm Hex Screws (39)
and two M10 Washers (37);
do not tighten the
Screws yet.
1
•• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
•• Assembly requires three persons.
•• Due to its weight and size, the weight rack should
be assembled in the location where it will be
used. Make sure that there is enough clearance
to walk around the weight rack as you
assemble it.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you
 nish all assembly steps.
•• Left parts are marked ““L”” or ““Left”” and right parts
are marked ““R”” or ““Right.””
•• To identify small parts, see page 5.
•• In addition to the included tool(s), assembly
requires the following tool(s):
one adjustable wrench
one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.