10
8
103
75
8. Attach the Backrest Cover (103) to the Backrest
(8) with two M6 x 18mm Screws (75).
8
9
44
102
Pins
42
43
2
Wire Ties
Wire
Ties
1
9. Orient the Upright (2) and the Top Shield (44)
as shown. Slide the Top Shield upward onto the
Upright.
Have a second person hold the Upright (2) and
the Top Shield (44) near the Frame (1) until
step 10.
Locate the Receiver Wire (102) and make sure
that the connector with metal pins is in the indi-
cated location.
Locate the wire ties in the Upright (2). Tie the
lower end of one wire tie to the Main Wire (43)
and to the Frame Pulse Wire (42). Tie the end of
the other wire tie to the end of the Receiver Wire
(102). Next, pull the upper ends of the wire ties
upward out of the top of the Upright.
Tip: To prevent the wires from falling into the
Upright (2), secure the wires with the wire
ties.
