Freedom Lite Marine Installation Manual Revision 1
P a g e
16 | 26
Figure 4.2 Picture Showing 2 x RJ45 Sockets for CAN Bus (optional cable for Analogue and
Relay Control not shown)
Figure 4.2 CAN Bus Connection Example with Four Lites
Freedom Won offers a fair trade in on Freedom Lite’s on the purchase of new units, which is
an option for somebody wishing to expand their battery capacity instead of installing
parallel units. Please request more detail from Freedom Won if this is your upgrade
preference.
New units can be placed in parallel with old units up to about 5 years or 1 500 cycles, after
which it is preferable to trade in for a new larger unit or two new similar units.
4.
Programming the Freedom Lite
The serial DB9 connector is used for setting up the profile of the BMS. A serial to USB
adaptor is required for connecting the Freedom Lite Marine to a computer and the
computer must have the correct utility software installed. Programming of the BMS is
intended only as a function to be performed by Freedom Won and approved installers. The
manual on how to operate the BMS along with the utility is available to approved installers
