Freedom Lite Home and Business HV Installation Manual Revision 1
P a g e
5 | 25
11.
On Button
12.
Off Button
13.
Lifting Eye Bolt Hard Point position
14.
Safety Retaining Tab position for Floor Mount Option (included on the 30/24 model
and larger)
15.
Plastic Feet (60/48 and 80/64 models have aluminium feet)
The weight of each model is given in the tables. The Freedom Lite Home 15/12HV and
20/16HV models can be manually lifted by four people and maneuvered by two. The larger
units typically require lifting equipment of varying degrees for handling and installation as
explained later in this document.
The dimensions given are for the principle outlines of the aluminium housing and exclude
items that protrude such as the DC cable glands and the circuit breaker handle.
The DC cables exit the unit through glands [4] located on the
top right-hand side
of the
casing. For this range all models have one positive and one negative cable. The sizes and
lengths are provided in Table 2.1. The correct cable lugs for connecting these leads to the
inverter must be in hand when doing an installation. If there are several inverters and
charge controllers that need to be connected to the battery it is advisable to install a DC
connector box to use as a junction point from which to branch out to all the battery
connected equipment.
Note the model specifications label and serial number on the label shown by label [5].
