50
ONYX Deskset XL
User’s Guide
Problem
Solution
The unit does not turn on.
Ensure that the camera and VGA
monitor are both plugged in.
Ensure that the wall outlets have power
and are not malfunctioning. If the outlets
are connected to a wall switch, make
sure that the switch is on.
Ensure that the remote control is
working. The red LED in the upper left
corner of the remote control flashes
when a button is pushed. If this does not
happen, replace the two AAA batteries.
Make sure that you use the remote
control that is paired with your camera.
The image on the screen is too bright, or
there is a glare from the screen that
makes it difficult to see.
Use the yellow
BRIGHTNESS
buttons
or
to reduce the brightness.
Press the blue
VIDEO MODE
button
to switch to a different video mode.
