12
2.
Windows will detect the display and install the appropriate
drivers.
Note:
Windows XP will display a Found New Hardware Wizard,
prompting you to locate the driver. Choose the option to
automatically install the software then select Finish to complete
the installation.
3.
Once Windows has confirmed that the hardware was
successfully installed, close and then restart JAWS. JAWS
automatically detects and begins using your Focus 80 Blue
braille display.
Configuring the Bluetooth Connection
In order to use the Focus Blue with JAWS wirelessly over Bluetooth, you
must first configure a Bluetooth partnership between the Focus and
computer.
To set up a Bluetooth partnership between the Focus display and
computer using Windows 7 or Windows Vista, do the following:
1.
Make sure that Bluetooth is enabled on the computer running
JAWS. If you are using an external USB Bluetooth adapter,
insert it and ensure it is detected properly.
2.
Power on the focus. The firmware version and battery status
information is displayed.
3.
On the computer, go to the Control Panel and type "bluetooth"
into the Search edit box.
4.
Press
TAB
to move to Add Bluetooth Device and press
ENTER
.
The computer will begin searching for Bluetooth devices. This
may take several seconds. You are placed in the list of devices
when the search is complete.
5.
Use the
ARROW
keys to select your Focus display from the list,
for example, Focus 80 BT, and then choose Next. If the Focus
display was not found, make sure it is turned on then select the
Retry button.