21
The Display Menu
Pressing
DOTS 1-4-7-8 CHORD
while the Focus status information is
displayed activates a menu where you can view
the Focus display’s Bluetooth
ID, change the key repeat interval for the NAV Rockers, and adjust the length
of time the display will wait after a control is pressed before going to sleep.
When the menu first opens, you are on the Bluetooth ID. To move through the
available settings, press DOTS 4-5 CHORD or DOTS 1-2 CHORD. To move
through the available options for a setting, use the Rocker Bars. To exit the
menu and save any changes you have made, press
DOT 8
. Press
Z CHORD
(
DOTS 1-3-5-6 CHORD
) to exit the menu without saving any changes. Both of
these commands will also return the display to normal operation.
The available menu options are described in the following sections.
Bluetooth ID
This option displays the Bluetooth ID used by the Focus 14 Blue to identify
itself when pairing the display with a computer or mobile phone. The default
Bluetooth ID for the Focus 14 is F14 plus the 8-digit Bluetooth MAC address.
The Bluetooth MAC address is different for each Focus display. This is useful if
you will be pairing the Focus with a computer in an environment where there
are other Focus Blue displays with Bluetooth enabled and you want to make
sure you pair the correct one.
Key Repeat
This option controls how fast the NAV Rockers on the display repeat when held
down for a length of time, such as when you want to scroll quickly through the
items in a list. The four settings are off, slow, medium, and fast. Off is indicated
by a full braille cell at the far left of the display in cell one. Two full braille cells
indicate slow, three full braille cells indicate medium, and four full cells indicate
fast. By default, two full cells are shown, which means the key repeat is set to
slow.
