Freedom Scientific Eye-Pal, User Manual

Page: 9 / 16

5
Pause/Resume Reading
– the second button from the left. It is marked with
two vertical lines. Press this button to pause and resume reading. If this button
is held down for 3 seconds, it will enable/disable the use of the motion
activated controls.
Read Previous Sentence
– the first button on the left marked with an arrow
pointing left. It is used to return to the previous sentence. This button may be
pressed as many times as needed to return to a specific sentence.
Reading Speed
– there are two triangle buttons, one above the other, located
to the right of the pause button. The top button will increase the reading speed
while the bottom button will decrease the reading speed.
Restarting
– to restart Eye-Pal Reader for any reason, press the first button in
the hidden control panel on the left side for 5 seconds. You will hear
“Restarting.”
Motion Activated Controls
To enable the motion-activated controls, press and hold the pause button in
the hidden front panel for 3 seconds. You will hear “Gesture Commands
Enabled.”
Pause/Stop Reading
– move your hand slowly above the printed material from
left to right.
Resume Reading
– move your hand slowly above the printed material from left
to right.
Read Previous Sentence
– move your hand slowly from right to left above the
printed material. Move your hand as many times as it takes to reach any
sentence.