2
Assembly
1. Place Eye-Pal Reader on a flat surface with the front panel facing toward
you.
2. Unfold the camera. Pull the camera arm up until it locks into place. You will
hear a clicking sound indicating that the arm is in place.
3. Swivel/pull the camera head up until it also locks into place. Again you will
hear a clicking sound indicating that the camera head is in place.
4. Connect the power supply to the power cord. Turn Eye-Pal Reader around
so the front panel is facing away from you. Plug the power supply into the
back of the base on the left side. Next, plug the other end into a power
outlet.
Your Eye-Pal Reader is now ready to use.
Note:
There is a headphone port on the right side of Eye-Pal Reader for
private listening. A headset is NOT included.
Summary of Contents for Eye-Pal
Page 4: ......
