Revised 4/3/17
Anchor Installation: Retro-Fit Concrete
7.
Carefully insert the anchor into the hole. Pour a small amount of 2 part epoxy, or equivalent, around
NOTE: Fill the hole about 1/3 full of 2 part epoxy, or equivalent, prior to inserting the anchor. As
you insert the anchor, rotate it back and forth so that you can evenly distribute the cement
or epoxy around the anchor.
8.
the anchor making sure there are no void spaces. Let cement or epoxy cure for 24 hours (or minimum
manufacturer’s recommendations) before installing and using lift.
[20.3cm]
8" MIN.
[51 cm] 20" MAX
[30.5 cm] 12" MIN
[15 cm]
6" MIN
[107cm]
42"
TO
[122cm]
48"
CL
ANCHOR SOCKET
TOP OF SLAB
GROUNDING LUG
CEMENT/EPOXY
FIGURE 1
4
