INSTALLATION INSTRUCTIONS
1222 Instructions 3-9-15.doc
Page 2 of 5
Step 1:
Use a plastic trim removal tool to remove
left and right side front console trim.
Step 2:
Remove (2) 7mm sockets from the front of
the left and the right side of the console.
Step 3:
Remove rubber tray insert from front of
console.
Step 4:
Remove (2) 7 mm sockets from under
rubber tray.
Removal is not required but it does
help with lifting the top of console.
Step 5:
Use a plastic trim removal tool to loosen
the console top trim from inside the armrest.
Step 6:
Lift up from rear of console to unclip the
top of console.
Ensure the front of console side is
pulled out slightly.
