19
EN
5
Using Freecom Turbo USB 2.0 (only PC)
Chapter 5: Using Freecom Turbo USB .0 (only PC)
By installing the Turbo USB 2.0 driver for your ToughDrive Sport, the data transfer rate
can be significantly increased (up to 40% faster transfer speed compared to standard
High-Speed USB).
Enabling the Turbo USB .0 driver
1. Connect the Freecom ToughDrive Sport to your PC.
2. Run “Start.exe” from your ToughDrive Sport and go to Software Installation -> Freecom
Turbo USB 2.0.
3. The Freecom Turbo USB 2.0 Wizard will open.
4. Check the drive and click on “Configure” to enable the Turbo USB2.0 driver for the
Freecom ToughDrive Sport.
Disabling the Turbo USB .0 driver
5. Connect the Freecom ToughDrive Sport to your PC.
6. Run “Start.exe” from your ToughDrive Sport and go to Software Installation -> Freecom
Turbo USB 2.0.
7. The Freecom Turbo USB 2.0 Wizard will open. Uncheck the drive and click on “Configure”
to disable the Freecom Turbo USB 2.0 driver for the Freecom ToughDrive Sport.
