7
GB
2
GB
1
Software installation
C
HAPTER
2:
Software installation
2.1 Software installation under Windows 95
No special software is required to install your FREECOM Cable II PCMCIA. We
however recommend using the driver on diskette/CD that we have enclosed. This
has been specially developed by FREECOM and is faster than the Windows driver.
FREECOM HighSpeed Driver (recommended)
Note: If you are not prompted to install the driver, Windows will install
the default driver automatically. Proceed then as described in the section
on later installation of the FREECOM HighSpeed driver.
To install the FREECOM driver, insert the FREECOM installation diskette/CD in your
PC drive.
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. The window "Hardware Installation Wizard" opens. The FREECOM Cable II
PCMCIA is recognized as "Standard IDE/ESDI Hard Disk Controller". Confirm
with "Next" to continue the installation.
3. The Freecom driver is found in the next the window. Confirm by clicking
Finish.
4. The driver is installed from the disk/CD.
5. To finish installing the driver, Windows asks you to restart your computer. After
restart your FREECOM drive appears under My Computer with new a new
drive letter
Uninstalling the FREECOM HighSpeed Driver
To uninstall the FREECOM HighSpeed driver, select the file "DriverRemove.exe" on
the installation diskette/CD and follow the on-screen instructions.
Windows Default Driver
No special software is required to install your FREECOM Cable II PCMCIA.
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. The window "Hardware Installation Wizard" opens. The FREECOM Cable II
PCMCIA is recognized as "Standard IDE/ESDI Hard Disk Controller". Confirm
with "Next" to continue the installation.
3. The driver is found in the next window. To install the Windows default driver,
click "Finish".
4. To finish installing the driver, Windows asks you to restart your computer. After
restart your FREECOM drive appears under My Computer with new a new
drive letter.
