14
FREECOM CABLE II PCMCIA / CABLE II CardBus
GB
2
Windows Default Driver
If Windows does not automatically install the default driver, proceed as follows.
No driver software is required to install the Windows default driver.
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. The window for searching for new hardware opens. Under Windows 2000,
Cable II is recognized as "PCMCIA IDE/ATAPI Controller" and the drivers are
components of the operating systems. Confirm with "Next".
3. In the next window, the option appears for finding a suitable driver for the
device. Confirm with "Next".
4. In the next window, click on "Finish" to conclude the driver installation. Your
FREECOM drive now appears with a new drive letter under "My Computer".
Later Installation of the FREECOM HighSpeed Driver
Note: If you are not prompted to install the driver, your system has
automatically installed the Windows default driver for your FREECOM
Cable II PCMCIA.
To install the FREECOM HighSpeed driver, proceed as follows:
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. Open the "Device Manager" by right-clicking on the "My Computer" icon. A
menu opens. Select "Properties". Then click on the "Hardware" tab and start
the "Device Manager" from there.
3. Click on the "+" next to the entry "IDE ATA/ATAPI Controller".
4. Double-click on "PCMCIA IDE/ATAPI Controller".
5. Open the "Driver" tab. Then click on "Update Driver".
6. The "Update Device Driver Wizard" opens. Click on "Next".
7. In the next window, the default option for finding a suitable driver for the
device is selected. Confirm with "Next".
8. Now you can select where the FREECOM HighSpeed driver is to be installed.
Insert the FREECOM driver diskette/CD and select the floppy drive or the CD-
ROM drive. Confirm with "Next".
9. The FREECOM HighSpeed driver is then searched. Confirm the selection
afterwards with "Next". The FREECOM HighSpeed driver is installed.
10. After completion of the installation, click on "Finish". Your FREECOM drive
appears with a new drive letter under "My Computer". The installation is then
complete.
