Setting Usage of External Footswitch for Selecting whether to Output the Input Signal (Dry Sound) or not
An external footswitch (momentary type) connected to the
EXP/CV/FS
terminal can be used to select whether to
output (ON) the input signal or not (OFF).
1.
Press the cursor
▶
key to show the
EXP/FS ASSIGN
screen.
2.
Turn the
DELAY TIME (PARAM)
encoder to select DRY ONOF.
3.
Press the
HOME
switch. The display changes to the HOME screen.
NOTE
When the effect is activated, the dry sound can be turned on/off by operating an external footswitch.
To save the changed setting in a preset, refer to “How to Edit Parameter Setting and Save to Preset”
on
p. 7.
NOTE
For the functions assignable to the
EXP/CV/FS
terminal, refer to the separate table (Assignable Functions on
p. 19
).
NOTE
For complete list of Edit menu items, refer to Edit Menu Flowchart on
p.16.
Edit Menu
The parameter for each preset is edited in Edit mode.
How to Change or Confirm Parameter Setting
1.
Press the
HOME
switch to shown the HOME screen or Operation Screen 1, 2 or 3.
2.
Press the cursor right
▶
key to show the
Edit
screen.
3.
Use the cursor left
◀
or right
▶
key to select the function to be edited.
4.
Turn the
DELAY TIME (PARAM)
encoder to change the parameter.
5.
After confirmation or edit, press the
HOME
switch. The display returns to the HOME screen.
Functions in Edit Screen
①
COSMIC MODE
Set the cosmic mode. You can choose from 5 different settings of Cosmic Filter.
Selecting Cosmic Mode E to reflect the COSMIC E: gain and frequency settings saved in the global settings.
Parameter
OFF (default), A, B, C, D, E
②
EFFECT BITS
Adjusts the number of output bits for delay sound in the range of 8-bit to 24-bit. The larger the number of bits,
the more faithfully the sound will be output to the signal processed by the DSP. On the other hand, as the
number of bits decreases, it becomes impossible to output with fidelity, and the delay component with a low
volume is output as noise.
Parameter
8-24 (default value: 24 BITS)
④
REVERSE DELAY
Turns the reverse delay on or off. Select [ON w/DRY] (both the original and reverse delay sounds are output) or
[ON woDRY] (only the reverse delay sound is output.
Parameter
OFF (default), ON with DRY, ON without DRY
⑤
TRAIL
Selects whether the delay sound is retained or not when the effect is turned on/off or when the preset is
changed. If the FEEDBACK value set to higher than 90, the unit automatically decreases the feedback amount to
lower the delay sound volume gradually.
Parameter
OFF (default), ON
⑦
PRESET NAME - Naming Presets
Each preset can be named.
A character can be inserted at the cursor position (inverted display). Press the
◀
/
▶
cursor key to move the
insertion point. Turn the
DELAY TIME (PARAM)
encoder to select the desired character. To delete a character,
press the
PRESET
footswitch once: the character at the cursor position is deleted and the entire label is shifted
leftward. To enter a character, press the
ON/OFF
footswitch once. A space is inserted and the entire label after
the cursor position is shifted rightward. After entering/editing the preset name press the
SAVE
switch to save it.
Or to cancel the operation, press the
HOME
switch or turn any knob.
③
BAND PASS FILTER
Selects the band-pass filter from five types.
Parameter
OFF (default), 40-18k, 50-15k, 60-12k, 60-9k, 60-2k
10
11
⑥
Assignment Setting of EXP/CV/FS Terminal (EXP/FS ASSIGN)
COSMIC WAVE can assign a function to its
EXP/CV/FS
terminal. Press the cursor
▶
key until the display
indicates the Assignment Setting screen. Then turn the
DELAY TIME(PARAM)
encoder to select the function
to be assigned.