M
aurice Pincoffs Canada ©2013
6
Step 3
Turn the tension control (20) to level 8, connect it to the extension tension cable (21).(see insert)
Connect the extension sensor wire (29) to the sensor wire (25).
Connect the front pulse wires (7) to the front extension pulse wires (22).
Attach the front post (2) to the main frame (1). Secure using four allen screws (17) and four arc
washers (24).
Connect upper pulse wire (7) and extension sensor wire (29) to the back of the computer (13)
respectively.
Attach the computer (13) onto the bracket of the front post (2). Secure using
four
screws (23)
which are pre-assembled on the back of computer.
NOTE: Before attaching the computer to the front post, please ensure the wires are safely tucked
inside the opening of the handlebar post. This will ensure that the computer slides on easily and
avoids pinching the wire.
