X-Hi-Idle.p65 rev11Sep97nb
Page 23
OPTIONAL HIGH IDLE WIRING
Black
Red
From Control Module
2500 ohm potentiometer
High idle indicator light
GND
High idle ON/OFF switch
White
Supply 12 VDC when the parking
brake is on and the transmission is in
neutral.
Interlock
white wire on the
power cable
Diode
Figure 7
Part # PRO-38H
Note: Some FRC governors require an RPM sensor to be mounted on the drive shaft.
If you have one of these units, be sure that the sensor is mounted on a section of shaft
that spins even when the pump is not engaged or the high idle may not be able to function
except when the pump is in gear. If there is no room to mount the sensor in such a
location, a special Alternator connection for RPM signal may be required. This option
may not be available for all devices, so be sure to call FRC for details.
O.K. to pump
Diode
Summary of Contents for GOVERNOR PRO 3
Page 19: ...servo p65 REV15AUG97 Page 19...
