Camisa Mini Dumpers TP 280 Eco
TP 280
TP 285
54
Fig. 112
Fig. 113
IMPORTANT: When replacing/topping up the oil never exceed the
maximum level allowed.
Always check the oil levels after disconnecting equipment
Cable adjustment
Periodically check the proper functioning of the control cables
IMPORTANT: after adjusting the cables check that the machine is
working properly. If operation is abnormal, contact an Authorized
Workshop or, if there are none, contact F.lli CAMISA Company directly.
CLUTCH-BRAKE-TRACTION CABLE ADJUSTMENT
1-
Take off the 3 Torx screws using the relevant spanner (Fig. 114 - 115 - 116)
2-
Check that the distance between the clutch-brake-traction lever is 38-40 mm in resting
position (Fig. 117), otherwise act on the relative regulator.
3-
Remove the protective casing of the transmission belt (Fig. 118)
4-
Check that the distance between the frame and the tensioner bearing is 18-20 mm (Fig. 119)
5-
Put the safety device back on and tighten the screws.
Fig. 114
Fig. 115
