3
PAGE
VERSION:
200619
LICENSED FABRICATOR OF MAGNATRACK
CARE & MAINTENANCE and WARRANTY - MAGNATRACK SYSTEMS
CARE & MAINTENANCE FOR CLEAR VINYL
Recommended Products for Cleaning:
IMAR Products. IMAR Strataglass Protective Polish, IMAR Strataglass Protective Cleaner, and mild
soap (preferably) IMAR Yacht Soap Concentrate). Use of harsh cleaners like “Simple Green, Glass
cleaners with Ammonia, and Orpine” will dull the shades quickly. Using any other product(s) void
the factory warranty.
303 Clear Vinyl Protective Cleaner
is also approved for cleaning of vinyl panels. 303 Clear Vinyl
Protectant offers superior protection against the harmful effects of UV rays. This product is all
you need to safely clean and protect against yellowing and cracking of vinyl, clear vinyl, leaving a
non‐streaking finish.
‐ NEVER
use a wash‐and‐wax product on vinyl panels.
‐ WARNING
Use of Rain‐X, Pledge, or Plexus on your vinyl panels will appear to work for a
short time but then dulls the surface and presents an “Orange Peel” effect. Do not use
any of these products.
‐ Use of cleaners, polishes, scratch removers, or any other product made for regular,
uncoated vinyl will damage your vinyl panels.
Do not use these products
.
‐ DO NOT HANDLE VINYL WITH SUNSCREEN ON YOUR HANDS!
This will permanently
cloud the vinyl where handled.
GENERAL MAINTENANCE
For the customer:
We recommend using IMAR Strataglass protective Polish or 303 Clear Vinyl
Protectant or cleaner every 1 to 2 months.
Note:
All new vinyl can easily get impressions. It is recommended new enclosures be left in place
to the extent possible. Vinyl “seasons” over time and becomes less impressionable. Roll all curtains
down and fasten in place nightly to keep perfect appearance.
Cleaning:
Apply the soapy water to the clear vinyl section of the curtain with special purpose
washing mitt or soft cotton cloths. Thoroughly rinse the soapy solution with fresh water and
completely dry the curtains with a high quality chamois. After washing the curtains, apply 303 or
IMAR Strataglass Protective Polish sparingly with small, light circular motions using a soft cotton
cloth. Allow the polish to dry and then remove with a clean soft cotton cloth. Finally, lightly buff
to a sparkling shine. For routine maintenance between polishing, use IMAR Strataglass Protective
Cleaner. Insure the clear vinyl panels are free of abrasives. Very lightly mist a soft cotton cloth.
Lightly and briskly rub a manageable sized area and then lightly buff dry with another clean cloth.
Restoring:
Some actual damage cannot truly be repaired. If 303 or IMAR Protective Polish cannot
restore the clarity and shine, it may be time to consider replacing the enclosures.
CARE & MAINTENANCE FOR SHADE FABRICS
All shading fabrics are inherently fire‐rated and anti‐bacterial. The sheer composition of the
fabrics and their vertical properties typically make them resistant to everyday dust particles. In
renovation environments a gentle non‐intrusive vacuuming of the shadecloths and mounting
