5
POS. 2: RAKING INTO 2 SWATHS
Figure 9: Position 2
– Placed behind the tractor.
When raking into double swaths, adjust the machine to the maximum working width (cylinder 42451), and
have the rake running straight behind the tractor (adjust bolt 42452).
– see figure 9 – if necessary.
The right-hand protective bracket should have been fitted, while the left-hand protective bracket should be
fitted and adjust in the outermost hole on the mounting (42456).
The rotors run in the same direction of rotation (handle on turning gear 42509) as illustrated in figure 5, and
the tine arms run in the cam guide.
Both cam guides (42440) are set in position B, as illustrated in figure 7.
Figure 10: Adjusting Wheel height.
The wheel height is adjusted by disconnecting the
safety split (1210060) and rivet (41431).
Hereby
there are 5 adjustment possibilities on fittings
(42471).
Figur 11: Setting the driving direction.
The wheels can be rotated so that they always run
parallel to the driving direction. Safe splits (1210060)
removed, rivet (41431) lifted, where the wheel
bracket are rotating.
