8
TRANSPORT POSITION
Change-over from working position to transport position is as follows:
Telescope small cylinder (42411) completely.
Telescope large cylinder (42451) completely.
Remove bolt (42452) and swing the machine back until locking pawl (42439) engages., as illustrated on
figure 20.
Remove retainer (42492), turn right-hand protective bracket in behind the tractor.
Replace retainer (42492) so in the fact that safety bracket is locked in position. Turn left-hand
protective bracket in behind tractor and turn catch arm up. Turn mounting (42456) back and fit
on protective bracket to lock in position.
Fit rake arms as shown in illustration on figure 21.
Remove the catch arm.
.
Figure 20: Lock ratchet (42439)
engages, so the machine is
locked in transport position.
Figure 21: The machine is switched to transport
position.
