Fransgard SV-2500SE, Manual, Page: 5 / 12

3
Starting the machine
The machine is lowered on the wheels (picture 3) which
is adjusted to the needed raking height. Fine
adjustment of raking height is done on the top link. The
support leg is raised. By spreading the band will be
lifted by the hydraulic. The swath can be moved to the
right and side left by the transport band. When the
machine is moved in the
three-point hitch, the lock
bracket can be placed as shown (picture 4).
The best working performance is done by a forward
speed from 8
– 13 km/h (5-8 miles/h). Please check
rotor- and forward-speed according to the hay/crops
and your field conditions.
Transport position.
The machine must be kept in place by means of the
bracket and bolts (picture 5).
The wheels can be mounted in the bracket on the front
of the machine to increase the transport width
(picture 6).
Lubrication and maintenance
For every 5 hours working the machines bearings, and
stickers (picture 7) and PTO shaft. Retighten bolts, nuts
and V-belts at the same.
The gearbox is filled with 1,2 litre gear oil SAE 80/90 W
and has to be checked daily and refilled if needed.
Picture 3
Picture 4
Picture 7
Picture 5
Picture 6