ACCESS MANAGER™
This section will guide you through the installation and setup process for Franklin
Access Manager™ software.
Before getting started, you should become familiar with the documentation that came
with your USB Modem.
Installing Software
Warnings
• Make sure to complete the unplugging/ejection process before removing the U210.
• If you remove the device improperly, the modem may be damaged.
Notes
• If you have inserted the device properly, Windows will inform you of the new
hardware. Wait until Windows completes the “Found New Hardware” task.
• In Windows 2000, several windows similar to “Found New Hardware” window can
appear and disappear automatically. In Windows XP, several tool tips similar to the
“Found New Hardware” function will appear and disappear in the system tray
automatically. In Windows Vista, several tool tips similar to the “Installing device driver
software” function will appear and disappear in the system tray automatically. Once
hardware detection is complete, you will be prompted to start activation.
• It is normal to hear a short beep sound each time you insert or remove the U210.
• It is an audible notification that your PC recognizes the new hardware.
Getting Started (Windows)
To install the Franklin Access Manager™ software:
Turn on your computer then close all applications.
Insert the U210 modem into your USB port.
Your computer will recognize U210 modem and start the installation sequence
automatically. If the program does not launch automatically, go to my computer and
select the ‘FAMCD’ drive and double click ‘start.exe’ program.
Follow the steps in the next section.
Setup Program – for Windows
STEP 1
: The “Welcome to the Franklin Access Manager Setup Wizard” screen
appears. Click the [Next] button to continue with the installation process.
