background image

station in your area, please call (800)959-3558 in the United States.

The extent of the company’s liability under this warranty is limited to the repair or 

replacement provided above and, in no event, shall the company’s liability exceed the 

purchase price paid by purchaser for the product. 

Any implied warranties, including any implied warranty of merchant ability or fitness for 

a particular purpose, shall be limited to the duration of this written warranty. Any 

action for breach of any warranty must be brought within a period of 18 months from 

date of original purchase, but in no case shall the company be liable for a special 

consequential or incidental damages for breach of this or any other warranty, express 

or implied, whatsoever. The company shall not be liable for the delay in pending 

service under this warranty or loss of use during the time the produce is being repaired 

or replaced. 

No person or representative is authorized to assume for the Company any liability other 

than expressed herein in connection with the sale of this product.

Some states or provinces do not allow limitations on how long an implied warranty lasts 

on the exclusion or limitation of incidental or consequential damage so the above 

limitation or exclusions may not apply to you. This Warranty gives you specific legal 

rights, and you may also have other rights, which vary from state to state or province 

to province.

Franklin’s Authorized Service Center Address:

5440 Morehouse Dr.STE 1000 

San Diego, CA 92121

SAR INFORMATION

THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR 

EXPOSURE TO RADIO WAVES. 

Your wireless phone is a radio transmitter and receiver. It is designed and 

manufactured not to exceed the emission limits for exposure to radiofrequency (RF) 

energy set by the Federal Communications Commission of the U.S. Government. These 

limits are part of comprehensive guidelines and establish permitted levels of RF energy 

for the general population. The guidelines are based on standards that were developed 

by independent scientific organizations through periodic and thorough evaluation of 

scientific studies. The standards include a substantial safety margin designed to assure 

the safety of all persons, regardless of age and health. The exposure standard for 

wireless mobile phones employs a unit of measurement known as the Specific 

Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are 

conducted with the phone transmitting at its highest certified power level in all tested 

frequency bands. Although the SAR is determined at the highest certified power level, 

Summary of Contents for U210























Reviews: