background image

EXCLUSIVE REMEDY UNDER THIS LIMITED WARRAN-
TY, WILL BE REPAIR OR REPLACEMENT WITH THE
SAME OR AN EQUIVALENT PRODUCT OF THE DEFEC-
TIVE PORTION OF THE PRODUCT,  AT THE SOLE
OPTION OF FRANKLIN IF IT DETERMINES THAT THE
PRODUCT WAS DEFECTIVE AND THE DEFECTS
AROSE WITHIN THE DURATION OF THE LIMITED WAR-
RANTY. THIS REMEDY IS YOUR EXCLUSIVE REMEDY
FOR BREACH OF THIS WARRANTY. THIS WARRANTY
GIVES YOU CERTAIN RIGHTS; YOU MAY ALSO HAVE
OTHER LEGISLATED RIGHTS THAT MAY VARY FROM
JURISDICTION TO JURISDICTION.
(B) DISCLAIMER OF WARRANTIES AND LIMITATION OF LIA-
BILITY. 
EXCEPT FOR THE LIMITED WARRANTIES EXTAPLY
RECITED ABOVE, THIS FRANKLIN IS  PROVIDED ON AN “AS
IS” BASIS, WITHOUT ANY OTHER WARRANTIES OR CONDI-
TIONS, EXTAP OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABLE QUALITY, MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
OR THOSE ARISING BY LAW, STATUTE, USAGE OF TRADE,
OR COURSE OF DEALING. THIS WARRANTY APPLIES ONLY
TO PRODUCTS MANUFACTURED BY FRANKLIN AND DOES
NOT INCLUDE BATTERIES, CORROSION OF BATTERY CON-
TACTS OR ANY OTHER DAMAGE CAUSED BY BATTERIES.
NEITHER FRANKLIN NOR OUR DEALERS OR SUPPLIERS
SHALL HAVE ANY LIABILITY TO YOU OR ANY OTHER PER-
SON OR ENTITY FOR ANY INDIRECT, INCIDENTAL, SPECIAL,
OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUD-
ING, BUT NOT LIMITED TO, LOSS OF REVENUE OR PROFIT,
LOST OR DAMAGED DATA OR OTHER COMMERCIAL OR
ECONOMIC LOSS, EVEN IF WE HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, OR THEY ARE OTHER-
WISE FORESEEABLE. WE ARE ALSO NOT RESPONSIBLE
FOR CLAIMS BY A THIRD PARTY. OUR MAXIMUM AGGRE-
GATE LIABILITY TO YOU, AND THAT OF OUR DEALERS AND
SUPPLIERS, SHALL NOT EXCEED THE AMOUNT PAID BY

Summary of Contents for Rolodex RT-8212









































Reviews: